Installed Sound Products

No Compromise 12" Woofer

	Aluminium die-casting basket
	Patented design with rear vented voice coil: higher maximum power capacity 1000 Watts lower power-compression
	Extraordinarily low-distortion bass-reproduction through extremly long linear voice-coil excursion
	Double side coated diaphragm: very low distortion high degree of self damping weather-proof
	Exceptionally good ratio between inner and outer diameter
	Maximum sound pressure level 125 dB

Facilities for Different Operation Modes

	Integrated passive crossover, 12 dB/oct. slope
	Possibility to switch over to external active mode
	Optimum low frequency extension for the Pro X 5, Pro X 6, Pro X 12/80 and all RX models

Sophisticated Enclosure Construction

	Poor of resonances by means of numerous wall bracings: dry, impulse-proof bass sound linear, level-independant frequency response higher sound pressure level
	Poor power compression by generously dimensioned bass reflex ports
	Protection grille front side with acoustic foam
	Well transportable through 2 big sized metal grip caps and put back rear wall
	Adaptor for adjustable stand pipe SR 21

Acoustical
Sensitivity in 1 m with 1 W	92 dB SPL
Free field frequency response, passive (internal x-over)	40 Hz - 100 Hz ± 3 dB
Free field frequency response, with controler	40 Hz - 100 kHz ± 3 dB
Nominal power handling	450 W
Max. power handling	1000 W
Max. SPL in 1 m, 180 ms sinewave burst	125 dB SPL
Electrical
Impedance	8 Ohms
Crossover, passive (internal x-over)	100 kHz, 12 dB/oct
Crossover, active (with controller modul)	100 kHz, 24 dB/oct
Protection circuit, active	Limiter
Mechanical
Material	18 mm birch multiplex
Cabinet Surface	Painted finish
Color standard	Anthracite (RAL 7021)
Special (add-on price)	On request
Handles	2 mm
Stand flange	On top
Dampening material	Sheep´s wool
Baffle cover	Dent-proof grille, acoustic foam inside or outside
Terminals	3 x SPEAKON; Input: +/-, linked to Through; PRO X TOP
Switch, active/passive	2 x switches
Drivers	Coated cone, weather proof
Woofer	12" long excursion die cast chassis
Mounting points	ANCRA JUNGFALK flight rails (optional) on sides
Height x width x depth	440 x 376 x 620 mm / 17.5" x 15" x 25.5"
Wheigt	30 kg / 66.1 lbs
Recommended controllers	Pro C 28, Pro C 24
Recommended amplifiers	Pro A 2000
Accessories	Under a loudspeaker LH 37 + LH 80 LH 37 + LH 12 LH 37 + LH 36 + LH 80  LH 37 + LH 36 + LH 12 LH 37 + LH 25 LH 37 + LH 26 LH 33 + LH 37 + LH 25 LH 33 + LH 37 + LH 26