Installed Sound Products

The SMS series surface mount loudspeakers are appropriate for background music and voice reinforcement in applications where high sonic performance is demanded. Compatible with both 70/100 V systems and direct drive parallel systems, the SMS systems are well suited for conference rooms, auditoria, convention centers, airports, shopping centers, restaurants and entertainment fill applications. They are compatible with the CMS series ceiling mount speakers and provide a consistent sound quality when used together. The K-lock mounting system allows the mounting bracket to be pre-installed, pre-wired, pre-tested for correct wiring, pre-aimed and locked down and then protected from paint and dust until the project site is suitable for loudspeaker installation. The addition of the loudspeaker at the end of the project takes seconds and most of the system test can already be complete.

K-Lock™ Competition The FASTEST Loudspeaker in the world - Video

The distributed loudspeaker system shall consist of surface mount units with a 6" low frequency driver and a 1" dome high frequency tweeter, the overall impedance of the speaker shall be 16 Ohms with a by-passable 70/100 V transformer with taps at 60 Watts, 30 Watts, 15 Watts, 8 Watts and 4 Watts at 100 V accessible from behind the backcover. The sensitivity of the loudspeaker shall produce 91 dB SPL in half space with a power input of 1 Watt. The frequency response shall extend down to 75 Hz at –3 dB on axis. The peak SPL shall be 112 dB and the loudspeaker shall handle a peak power of 300 Watts, 160 Watts program when the transformer is bypassed. The speaker shall be mounted using a bracket integrating both electrical and mechanical connections in one unit. The mounting bracket may be mounted to the wall, electrically terminated, pre-tested and protected against dust and paint with the included cover before actual speaker installation. The installation of the speaker itself shall require no tools and may be performed by a single person on a ladder. An anti-theft locking screw may be tightened if desired. The distributed surface mount loudspeaker shall be the SMS 62 T.